Woodworking Plans The plans include nine 18″ X 24″ sheets of drawings covering every part of the boat. The construction jig and boat components are fully ...DIY Pull String Box
for 1 last update 2020/06/03
Wannabe DIY-er and frequent HGTV watcher, Sara P.
I''s partly because I had to stop in the middle of it and make dinner for my husband. Note: All of the work was done by myself, alone, with no advice from the husband. ""
Woodworking Planshow to Woodworking Plans for
Step 1. Buy the materials. After owning my house for three years and I have become way too familiar with my Lowe''ll need before you start cutting.Woodworking Planshow to Woodworking Plans for the 1 last update 2020/06/03
Step 3. Cutting. I was a bit concerned about this part, since I''t say I was super exact in cutting along my measurements (maybe off by an 1/8'' sometimes), but apparently close only counts in horseshoes and hand grenades...and hockey trees:)
This picture shows all the materials with the two 10 ft. PVC pipes cut down to the necessary lengths. The ends of the lengths were pretty rough once I cut them, so I did "" them all quickly with a scotch brite pad to take off the edges.
Step 4. Assembly. I followed the directions and it was clear and easy to assemble. I decided to do a dry fit first, before using the PVC cement, but after I put it together it seemed to hold up ok so I chose not to use the cement at all. I didn''t need any of the larger couplings or the zip ties. I''m hoping to come up with an attachment to hang my pants from. I also like the "" in their picture for hanging up your jerseys. I am super happy with my new hockey tree; it was easy to make and I can now proudly display my equipment without taking up an entire room.
2/11/2012 10:21:57 am
I actually purchased one of these already pre-made from someone on eBay because I don''s great you were able to make it yourself.
2/13/2012 01:50:44 am
Woodworking Planshow to Woodworking Plans for It was quite easy to make, I was surprised. The one thing people might not have lying around is the mitre box and saw. I think you could get around that though, if you had too. The project is pretty forgiving with getting the cuts right and the directions are super easy.
2/26/2012 03:35:43 am
I''s gear, but don''ll see they also build in an "" off the top of the three to hang jerseys. You may be able to rig something similar for hanging pants. You would just have to offset the weight so it doesn''t say the same).
for 1 last update 2020/06/03 Reply Reply
2/3/2014 12:36:29 pm
Can I get the measurements? That link is down
the 1 last update 2020/06/03 ReplyReply
2/4/2014 01:47:40 am
J - I didn''s Hockey Resource Blog
Charlene Bidula, Sara Petyk, Cori James and Val Sweeney blog about local for 1 last update 2020/06/03 women's hockey news, tips, teams and anything else they find helpful to all the women hockey players in Pittsburgh!